JUNE 20, 2019
Free software update to version 6.00.0
  • The mouse can now be controlled remotely, so that the program can be operated conveniently via the connected transmitter. The simulation can be started and stopped by double-clicking the assigned transmitters pushbutton. The configuration is done via the new dialog "Mouse remote control" of the "Radio" menu.
  • The simulation can now also be started by remote control via a short throttle or pitch pulse.
  • The simulation now also accommodates human movements of the model pilot and thus appears even more alive and natural. The intensity of the effect can be adjusted via the simulation parameter "Imitate Human Motion" on the "Camera" tab.
  • Dragging the direction of view with the mouse as well as zooming in/out with the mouse wheel has been improved and supplemented by an inertia effect.
  • On systems with touch screen (e.g. Tablet PC), it is now possible to drag the direction of view and zoom in/out via multitouch gestures.
  • The user can now intuitively touch and move the selected model by mouse or touch gesture. The physically correct behaviour of the model provides an even more convincing and immediate experience.
  • When using the Hover and Torque trainer, a 6x6 meter area is marked on the airfield, in which the model is to be maintained.
  • The effective prevention of pixel flicker has improved the rendering quality of models outside of the near range.
  • Also in Virtual Reality mode the simulation now continues after a crash, even if the model is only limitedly airworthy. Emergency landings and autorotation procedures can therefore be trained more effectively.
  • Various dialog windows have been revised to ensure a pleasant and smooth user experience, especially if the Windows settings under "System"/"Display"/"Scale and layout"/"Change the size of text, apps, and other items" were set higher than 100%.
  • The radio display can now be scaled more easily and also snaps centred.
  • When recalling certain dialogs, the last parameter changed is automatically re-selected, making it easier to adjust individual parameters.
  • The simulation now always starts with the rpm that corresponds to the respective position of the throttle stick, flight mode or autorotation switch.
  • Ground contact of propellers and rotors are now simulated more accurately.
  • The helicopter simulation now also considers a possible imbalance in the main rotor system.
  • The model context menu has been extended by the new functions "Transfer model to initial position" and "Reerect model".
  • The user experience has been improved by displaying a splash screen immediately after program launch.
  • If an attempt is made to make changes to the general channel assignment for a model with model-specific channel assignment, a new message box informs that the changes will have no effect on the current model.
  • Several bug fixes and performance optimizations have been made.


MAY 24, 2018
Free software update to version 5.09.3
  • Establishment of a privacy policy declaration providing information on the personal data processed during the use of REFLEX XTR² and on the rights the user is entitled to pursuant to the General Data Protection Regulation (GDPR).
  • Integration of a new dialog, which asks the user for his consent for the processing of his personal data prior to initiating the free trial period.
  • Extension of the dialogs Activate, Reactivate, Create flight convention and Join flight convention by adding a checkbox with which the user agrees to the processing of his personal data.


DECEMBER 14, 2017
Free software update to version 5.09.2
  • In telemetry display, main rotor pitch and tail rotor pitch are now displayed with one decimal place.
  • Bug fix: For models with model specific channel assignment, the model specific channel assignment did not load automatically after application restart.
  • Bug fix: On airplanes with more than 2 propellers not all propellers were properly animated in demo playback mode.
  • Bug fix: For airplanes, the engine running time continued countdown even if the drive has been switched off.
  • Bug fix: After expiry of the engine running time, the simulation restarted automatically even if the model was still gliding.


SEPTEMBER 08, 2017
Free software update to version 5.09.1
  • Extensive virtual reality support for the Oculus Rift headset including 3D and 6DOF.
  • Support for standard game controller compatible simulator interfaces.
  • New dialog "Select interface" for selection of the active interface.
  • New dialog "Try/Buy/Activate REFLEX XTR²" for operation without REFLEX XTR² USB interface.
  • More realistic rendering of the scenery in close vicinity due to new hide option of the compass rose.
  • Improved smoke rendering near the ground.
  • Performance optimization through multi-core processor support and conversion to DirectX 11.
  • Performance optimization when loading models and sceneries.
  • Improved helicopter flight behaviour when hovering in ground effect.
  • New model TYPHOON H from YUNEEC with detailed simulation of the modes SMART/ANGLE/HOME, WATCH/FOLLOW, GPS ON/OFF, GEAR UP/DOWN, PAN FOLLOW/FOLLOW AND CONTROLABLE/GLOBAL, TILT ANGLE/VELOCITY.
  • New models Extra 330 SC and EasyGlider 4 from MULTIPLEX.
  • Onboard camera position adjustable via cursor keys.
  • Revision of various models and sceneries.
  • Revision of the online help system.
  • Various bug fixes.
  • Support for TrackIR™ compatible head tracker removed.
  • Support for older operating systems than Windows 7 removed.


FEBRUARY 20, 2016
Free software update to version 5.08.2
  • New model Q500 TYPHOON 4K from YUNEEC.
  • New model FunCub XL from MULTIPLEX.


JULY 17, 2015
Free software update to version 5.08.1
  • New model ParkMaster PRO from MULTIPLEX.


JUNE 05, 2015
Free software update to version 5.08.0
  • New model FunGlider from MULTIPLEX.
  • Performance optimization of the load model procedure.
  • New model Q500 TYPHOON from YUNEEC. Simulation of the Flight-Modes SMART, ANGLE, HOME, WATCH ME and GPS OFF. Camera-Pitch/Tilt, Start/Stop, Flight-Mode and Control Rates adjustable via remote or keyboard. Realistic simulation of the CGO2 Camera-Gimbal. Accurate simulation of the various LED lighting and flashing signals.


MARCH 19, 2015
Free software update to version 5.07.2
  • New model RockStar from MULTIPLEX.


FEBRUARY 16, 2015
Free software update to version 5.07.1
  • New multicopter simulation of DJI's PHANTOM 2: Model "PHANTOM 2" simulates the default configuration with NAZA-M deactivated. Model "PHANTOM 2 (NAZA-M)" provides simulation with activated NAZA-M including the IOC Modes Off, Course Lock and Home Lock as well as the Control Modes GPS, Atti, Manual and Failsafe. IOC- and Control Modes are switchable via remote or keyboard. Saving Course Lock direction and Home position by corresponding actuation of the IOC switch. Display of the current IOC and Control Modes in the notification area of the radio display. Accurate simulation of the various LED lighting and flashing signals including those of the Battery Level Indicator. Realistic simulation of the various levels of low battery capacity warnings. Detection of Combination Stick Command (CSC) for start and stop of the motors. Realistic loss of lift simulation due to vortex ring state when descending too steep. Red or blue color scheme selectable.
  • New model HERON from MULTIPLEX.
  • New option for continuous remote control of the playback speed through the rudder function while holding the CTRL-key.
  • Improved readability of the radio display with increased sizeability and revised backlight simulation.
  • Fixed bug that led to derogation of flight conventions after observing participants by use of the related Observe user option.